← Back to blog

Washington Contractor Insurance Requirements: What to Carry

November 19, 2026
Washington Contractor Insurance Requirements: What to Carry

To register as a general contractor in Washington, you need a $30,000 surety bond and a general liability policy of $200,000 public liability plus $50,000 property damage (or a $250,000 combined single limit), with the Department of Labor & Industries (L&I) named as certificate holder. Specialty contractors need a $15,000 bond. If you have employees, workers' compensation is separate and mandatory. Those are the state minimums. Public agencies and commercial clients often ask for far more, and this guide shows where each requirement comes from so you can buy the right coverage once.

Genevainsgroup
Check Your Contractor Coverage
Geneva Insurance Group compares coverage across more than 25 A-rated carriers and reviews existing policies for gaps in plain language.
Visit

TL;DR

  • General contractors need a $30,000 bond and general liability of $200,000 public liability plus $50,000 property damage, or $250,000 combined single limit. Specialty contractors need a $15,000 bond.
  • L&I must be the certificate holder, and the bond and policy must carry your exact registered business name.
  • Workers' comp is required when you have employees, and a prime contractor can be liable for a subcontractor's unpaid premiums.
  • City and agency contracts routinely require $1 million to $5 million in limits, plus umbrella, auto, professional or pollution coverage depending on scope.
  • An independent agency can compare the same requirements across many carriers and check your certificates before you submit them.

Table of Contents

What Washington requires to register as a contractor

Washington requires construction contractors to register with L&I before they perform, advertise, offer or bid on work. L&I's steps-for-success guide says that covers building, altering or repairing structures, working as a superintendent, adding to or removing from real property, demolishing or moving it, installing cabinets, removing trees, and developing residential property to sell. It also covers flipping homes without living in them for a year after renovation. If your work touches any of those, assume you must register.

Washington does not give a competency test for general registration, according to L&I's homeowner guide. The state instead relies on financial protection: a bond and liability insurance. Electricians and plumbers are tested and licensed separately.

Per L&I's Register as a Contractor page, a general contractor must have:

  • A Washington Continuous Contractor Surety Bond of $30,000, or an equivalent Assignment of Savings.
  • A general liability policy of $200,000 public liability plus $50,000 property damage, or $250,000 combined single limit.
  • L&I listed as certificate holder.
  • The exact business name on both the bond and the policy.
  • Originals of both documents, plus the $150.20 registration fee.

The exact-name rule trips up more applicants than the dollar amounts. A bond issued to "Smith Builders" when you registered as "Smith Builders LLC" is a mismatch, and you start over.

Bond versus insurance: they protect different people

The two requirements get lumped together as "bonded and insured," but they do different jobs.

The bond is a guarantee to your customers. L&I explains in its homeowner guide that a homeowner can bring a civil action in Superior Court against the bond if a contractor leaves a job unfinished. If the bond pays, the surety then looks to you for repayment. It is not coverage for your own losses.

General liability insurance pays for damage you cause. The $50,000 property damage portion covers damage to other people's property, and the $200,000 public liability portion covers injuries and personal damages, as L&I's homeowner guide describes. It does not cover your tools, your vehicles or your employees' injuries.

If you want a plain-language walkthrough of the difference, our article on what bonded and insured actually mean lays out three checks small business owners should run.

General versus specialty contractors

A general contractor builds, remodels or manages work across multiple trades. A specialty contractor works in one trade, such as framing or painting. The bond differs, and RCW 18.27.040 sets the amounts. The liability insurance minimums on L&I's registration page are the same for both.

RequirementGeneral contractorSpecialty contractor
Surety bond (base amount)$30,000$15,000
General liability$200,000 public liability + $50,000 property damage, or $250,000 CSLSame
Certificate holderL&IL&I
Registration fee$150.20See L&I's registration page

Combined single limit (CSL) means one dollar figure covers both injury and property damage per claim, rather than splitting it into separate caps. Our piece on split limits versus CSL explains the same idea for auto liability, and the logic carries over.

What changed in 2024

If you read an older guide that says $12,000, it is out of date. L&I announced that effective July 1, 2024, general contractor bonds rose from $12,000 to $30,000 and specialty contractor bonds from $6,000 to $15,000. The increase phased in as contractors renewed. Under RCW 18.27.040(2), a contractor registered as of June 30, 2024 was treated as compliant until the next renewal of the certificate of registration.

By now, with renewals having cycled through, you should assume the new amounts apply to you. L&I's rule filing, WSR 24-10-086, also raised registration fees by the 6.40% fiscal growth factor and raised monetary penalties for infractions under chapter 18.27 RCW.

Higher bonds after a homeowner judgment

The same rule lets L&I require a larger bond when a contractor has final judgments involving a single-family residence in the previous five years. The amounts scale up:

  • General contractors: $40,000, $60,000 or $90,000.
  • Specialty contractors: $20,000, $30,000 or $45,000.

The rule's authority traces to a 2019 law that lets L&I require up to three times the normal bond after such a judgment. A clean record keeps you at the base amount, which is one more reason to document every job.

Keep the bond alive

Cancellation or revocation of the bond automatically suspends your registration until a new bond or reinstatement notice is filed and approved, per RCW 18.27.040. L&I's guide adds that you cannot renew unless your insurance and bond carriers have given L&I current proof. Know your renewal date, and tell whoever manages your policies before a policy changes carriers or lapses.

Workers' compensation: separate from registration

The registration minimums say nothing about your crew. Workers' compensation, called industrial insurance in Washington, is its own system. L&I's Employers' Guide states that coverage is mandatory for employers and eligible workers and is bought through the state fund. Only companies with at least $25 million in assets and some governmental bodies may qualify to self-insure.

That means a Washington contractor with employees does not shop this coverage among private carriers the way it shops general liability. The premium is still worth understanding, because it can be your largest insurance cost.

How premiums are set

L&I's premium rate explanation says rates rest on your risk classifications (over 300 of them), base rates per hour worked in each class, and your experience factor. Construction classification works by phase and type of work. L&I's ABCs of Risk Classification gives the example that framing, interior finish carpentry and deck installation carry different codes, so a general contractor doing several phases can be assigned several classifications.

The practical consequence is that hours must be reported accurately by type of work. L&I's published base rates for 2020 showed wood frame building construction at $4.7943 per hour worked and plumbing at $1.6182, which shows how widely trades differ. Base rates are reset periodically, so check L&I's current rate tables before you budget.

Workers’ compensation premiums vary by trade classification

Sole proprietors and owners

Working alone does not automatically put you under the same rules as an employer, but hiring even one worker usually does. L&I's homeowner guide notes that if you hire workers directly for new construction, remodeling or additions, you must provide workers' comp, report hours and pay premiums quarterly. If you are a sole proprietor or partner, ask L&I about optional elective coverage for yourself, since an injury on a job site is where an uncovered owner is most exposed.

Hiring subcontractors: where prime contractors get caught

If you are a general contractor who uses subs, this is the section that can cost real money. Under RCW 51.12.070 and 51.16.070, as summarized in L&I's publication on avoiding liability, a general contractor can be held responsible for a subcontractor's unpaid workers' comp premiums unless six conditions are met. Among them, both parties must be registered or licensed contractors and the sub must have an industrial insurance account in good standing with L&I or be a certified self-insured employer.

The Employers' Guide adds more conditions: the subcontractor keeps complete business books, works from a regular storefront or home office, and the prime contractor does not supervise the sub or its employees. Because the protection works only when every condition is true, build a simple file for each sub before work starts:

  1. A copy of the sub's L&I contractor registration.
  2. Proof of their industrial insurance account status.
  3. Their general liability certificate, naming you as additional insured where your contract requires it.
  4. A note confirming they run their own crew and books.

What clients and cities ask for beyond the state minimum

The state minimum gets you registered. It rarely gets you the contract. Public owners write their own insurance schedules, and they are much higher.

What clients and cities ask for beyond the state minimum

The Washington Department of Enterprise Services' insurance requirements manual recommends $5 million in general liability limits for construction contracts and $2 million for other contracts. It also says contractors providing professional services need professional liability, and it recommends auto liability for contractors hired to work on premises.

Cities set their own versions. Here is how three Washington cities compare, based on their published requirements:

CityWhat the published requirements include
TacomaCGL of $1M per occurrence and $2M aggregate, statutory Washington workers' comp, employers' liability at $1M, professional liability of $1M per claim and $2M aggregate for design or engineering scope, umbrella of at least $5M, cyber of at least $1M per claim and $2M aggregate
SeattleFollow-form umbrella or excess, contractor's pollution liability and professional liability at $1,000,000 each claim, crime and fidelity at $1,000,000, technology E&O and cyber at $1,000,000
BothellCommercial auto on ISO form CA 00 01 covering owned, non-owned and hired vehicles, umbrella over GL, auto and employers' liability, pollution liability, owner as additional insured, waiver of subrogation

Seattle's form dates from 2021, so treat it as a pattern and confirm against the solicitation you are bidding on.

Details that matter in the fine print

Tacoma's requirements show the kind of conditions that make a certificate fail even when the limits look right:

  • Claims-made coverage (other than pollution) must continue at least three years after the contract ends, and pollution coverage must continue six years.
  • Insurers must be licensed or authorized in Washington, or placed through a Washington surplus line broker, and rated A- VII or higher.
  • Deductibles or self-insured retentions above $25,000 must be disclosed and approved by the City's Risk Manager.

A few terms deserve a plain definition. An umbrella policy sits on top of your general liability and auto limits and pays once those are used up. Additional insured status gives the project owner direct rights under your policy. A waiver of subrogation stops your insurer from suing the owner to recover what it paid. Each one is an endorsement, meaning a change to the policy that must be added before the certificate is issued, not after a bid is awarded.

If you are deciding how high to set your limits, our guide on choosing coverage limits walks through how to match protection to what you could lose. If you are building new structures, a builders risk checklist shows what owners and contractors should settle with their agent first. Homeowners hiring a contractor can start with home renovation insurance before work starts.

A practical order of operations

Getting from "I need to register" to "I am registered and bid-ready" goes faster in this order:

  1. Confirm your registered name. Use the exact legal name that will appear on your L&I application. Every bond and certificate must match it.
  2. Decide general or specialty. This sets the bond amount.
  3. Place the bond. A surety issues the Continuous Contractor Surety Bond. Its cost depends on the surety's underwriting, so compare quotes rather than taking the first one.
  4. Place general liability. Ask for at least the L&I minimum, and ask what limits your target clients will want, so you do not buy twice.
  5. List L&I as certificate holder. Check this before the certificate is issued, since originals are required.
  6. Set up workers' comp. If you hire, open your L&I account and report hours by classification.
  7. Calendar your renewal. Bond and insurance proof must be current at renewal or registration cannot be renewed.

We do steps 3 to 5 through our construction and contractor insurance work: we compare general liability across more than 25 A-rated carriers, so one request covers many options, and we explain each endorsement in plain language before you sign.

Our perspective

The most expensive mistake we see in this field is buying the legal minimum and discovering at bid time that it is not enough. A policy that satisfies L&I does nothing for a city that wants a $5 million umbrella, or for a client that wants a waiver of subrogation.

That is why we work as an independent agency. We compare coverage across more than 25 A-rated carriers, so you see how limits, endorsements and pricing line up instead of hearing one company's version. We explain it in plain language, because a certificate full of jargon is easy to sign and hard to defend.

We also stay with you when a claim happens, because that is when the policy is tested. And our policy review costs you nothing: we look at what you carry today and point out where it falls short of the contracts you want to win.

David

Get your coverage checked before you bid

Geneva Insurance Group is an independent agency licensed in 17 states, and we can compare contractor coverage for your trade and the contracts you are chasing. Our free policy review analyzes your existing coverage and identifies gaps, with no fee and no obligation. When you are ready for pricing, request an insurance quote or start at our home page.

Genevainsgroup

If you also want your home and vehicles looked at while you are at it, our Washington insurance page covers personal lines in the state.

FAQ

How much insurance does a general contractor need in Washington?

To register, a general contractor needs a $30,000 surety bond and general liability of $200,000 public liability plus $50,000 property damage, or $250,000 combined single limit. L&I must be the certificate holder. Many clients and public agencies require higher limits, so check each contract.

Do I need workers' comp if I work alone?

Workers' compensation is mandatory for employers and their eligible workers, and L&I says to provide it when you hire workers directly for construction work. If you are a sole proprietor with no employees, ask L&I about optional elective coverage for yourself. Hiring even one worker changes your obligations.

Is a bond the same as insurance?

No. The bond protects customers by giving them recourse if a job is left unfinished. Insurance protects against damage and injury you cause. Washington registration requires both, and they are bought separately.

Did the bond amounts change?

Yes. Effective July 1, 2024, general contractor bonds went from $12,000 to $30,000 and specialty bonds from $6,000 to $15,000. A final judgment involving a single-family home in the previous five years can raise the required bond further.

What happens if my bond or insurance lapses?

Cancellation of the bond suspends your registration until a new bond or reinstatement notice is filed and approved. L&I also cannot renew your registration without current proof from both carriers. Keep renewal dates on your calendar.

Sources